chuangzhen@capping-machine.net
EN
chuangzhen@capping-machine.net
EN
Description：
A cap compression molding machine is used to make the particles of plastic to the bottle caps of carbonated beverages and mineral water by high-temperature plasticizing. This machine is simple to operate and can save electricity, water, raw materials labor, etc.
Feature:
screw cap 28, 2-start
Tamper-evident systems: Slit bridges,
Application: Screw,
Sealing system on bottleneck: Bore seal (olive type Double Seal).
Size: 28mm
Material: HDPE
Weight: 2.50g
Application: CSD
Cycle time: 4.7s
Size: 28mm
Material: HDPE
Weight: 2.52g
Application: CSD
Cycle time: 4.7s
Size: 28mm
Material: HDPE
Weight: 2.20g
Application: CAF&W
Cycle time: 4.2s
Size: 28mm
Material: PPcopolymer
Shell weight: 2.5g
Liner weight: 0.24g
Application: CSD
Cycle time: 4.2s
Size: 28mm
Material: HDPE
Weight: 2.80g
Application: CSD
Cycle time: 4.7s
Application: W
Material: HDPE
Weight: 0.90g
Thread: 3 leads
Cycle time: 4.7s
Application: W
Material: HDPE
Weight: 0.98g
Thread: 3 leads
Cycle time: 3.3s
Application: W
Material: HDPE
Weight: 1.25g
Thread: 3 leads
Cycle time: 3.3s
Application: W
Material: HDPE
Weight: 1.25g
Thread: 3 leads
Cycle time: 3.3s
Application: W
Material: HDPE
Weight: 1.25g
Thread: 3 leads
Cycle time: 3.3s
Application: CAF &W
Material: HDPE
Weight: 3. 10g
Thread: 3 leads
Cycle time: 4.7s
Application: HF
Material: HDPE
Weight: 3.55g
Thread: 2 leads
Cycle time: 5.1s
Material: HDPE
Weight: 1.8g
Anti-theft ring structure: incision
Material: PP
Weight: 2.3g
Anti-theft ring structure: incision
Material: PP
Weight: 3g/2.8g
Anti-theft ring structure: incision
Material: PP
Weight: 3g
Anti-theft ring structure: incision
Material: HDPE
Weight: 2.1g
Anti-theft ring structure: incision
Material: HDPE
Weight: 1.3g
Anti-theft ring structure: incision
Material: HDPE
Weight: 2.05g/1.85g
Anti-theft ring structure: incision
Material: HDPE
Weight: 2.05g/1.85g
Anti-theft ring structure: incision
Material: HDPE
Weight: 1.3g
Anti-theft ring structure: incision
Material: HDPE
Weight: 3g
Anti-theft ring structure: No
Material: HDPE
Weight: 3.9g/3.6g
Anti-theft ring structure: incision
Material: HDPE
Weight: 3g
Anti-theft ring structure: incision
Learn about our industry exhibition information and recent events in our company.
Extending the service life of high-volume compression molding dies is a practical concern that touches every cost line i...
Capping is the point in a packaging line where the container receives its closure after filling. The closure—screw cap, ...
Bottle caps perform a quiet but essential task: they close the container, protect what is inside, and allow controlled a...
Compression molding remains one of the preferred methods for producing plastic bottle caps at industrial scale. The proc...
Changeover and flexibility serve as practical cornerstones in bottle cap compression molding production lines. These cap...
Plastic bottle caps serve as simple yet critical components in packaging. They secure liquids inside containers, help ma...
Copyright © Taizhou Chuangzhen Machinery Manufacturing Co., Ltd. All Rights Reserved.
中文简体
русский
Español
عربى
